9 Best Risers for Desk Legs (October 2026)
The best desk risers for desk legs include the Laowu for adjustable table leg extensions, the ANNKUT 6 Inch Heavy Duty Bed Risers for a taller fixed lift, and the ANNKUT Furniture Risers 4 inch for adjustable block height.
On this page (4 sections)
The best desk risers for desk legs are Laowu extenders when your desk has compatible folding table legs and you want a choice of 3.6 or 5.2 in. For a fixed desk with separate feet, compare the foot shape and size against stackable or single-height supports before lifting all four corners.
Desk risers for legs sit under the desk's feet or attach around its legs. They raise the whole work surface, unlike a desktop riser that holds only a monitor or keyboard.
If you want to compare a complete four-leg setup, see our guide to the best four leg standing desk.
Our picks at a glance
-
1
-
2
-
3
- 4
Check itANNKUT Bed Risers 4 Inch Heavy Duty
Best for round furniture feet - 5
Check itshouwuhho Furniture Risers Bed Risers Heavy Duty
Best for small height adjustments - 6
Check itSephyroth Adjustable Bed Risers Furniture Risers 4Pack
Best for clamping upright legs - 7
Check itEcally 16 Pack Furniture Risers Adjustable Stackable
Best for multiple desk feet - 8
Check itSopicoz Wooden Bed Risers 3 Inch Round
Best for a wood finish - 9
Check ituxcell 2 inch Bed Risers with Adjustable
Best for clamping a desk frame
Which desk risers for desk legs fit your setup?
Laowu is the most adjustable pick here, while the ANNKUT and shouwuhho options raise compatible feet with stackable or fixed supports. Start by measuring each foot, checking whether it is angled, and deciding how much lift your desk can safely use.
Laowu: Best for adjustable table leg extensions
- Two height settings: 3.6 or 5.2 in
- Steel construction
- Rubber feet
- Reinforcement bolts
Four bolt-on extenders raise compatible folding table legs by 3.6 or 5.2 in. Rubber feet and reinforcement bolts add grip and support.
Pros
- Two height settings
- Designed for straight or bent legs
- Rubber feet and reinforcement bolts
Cons
- Designed for folding table legs
- Requires bolt-on installation
Laowu is the clearest match for folding desks and tables with straight or bent legs. The four steel extenders offer two settings, 3.6 or 5.2 in, so you can choose the lower raise without adding a separate block beneath each foot.
The design uses bolt-on installation and includes reinforcement bolts, locking pins and rubber leg covers. Rubber feet are intended to reduce slipping, while the extra bolts reinforce the connection.
This is a leg extension rather than a support block. Measure the leg style and mounting area first, then confirm the desk can remain stable at the added height.
Choose Laowu if you have a compatible folding table leg and want two lift settings. If your desk has wide flat feet or a frame that cannot accept the bolt-on parts, use a block-style riser instead.
ANNKUT 6 Inch Heavy Duty Bed Risers: Best for a taller fixed lift
- 5.1 in actual lift
- Fits furniture legs under 2.7 in wide
- Built-in rubber pads
- Trapezoid shape
These four risers provide a 5.1 in lift for compatible furniture legs. Check the leg width and the desk's stability at the added height.
Pros
- High lift
- Built-in rubber pads
- Made for desk and table legs
Cons
- Legs must be under 2.7 in wide
- Fixed lift height
ANNKUT's 6 in risers provide a 5.1 in actual lift, making them the tallest fixed option in this group. Each has a trapezoid design and built-in rubber pads, and the supported furniture leg must be under 2.7 in wide.
A taller desk can change how firmly the feet meet the floor, so check for wobble before regular use. Place one riser beneath each foot on a level surface and confirm the legs sit fully within the supported area.
The height can also create more space beneath the desk, but it may put the desktop above a comfortable working position. Measure from the floor to the desktop and compare that finished height with your standing posture.
Choose this set if the 5.1 in raise suits your body and leg width. For a smaller increase, the stackable ANNKUT blocks offer several height choices.
ANNKUT Furniture Risers 4 inch: Best for adjustable block height
- Stackable layers
- Three height options
- Fits legs up to 4.5 x 2.4 in
- Non-slip rubber bottoms
Stackable layers let you choose among three lift heights. The wider fit and L-shaped edge can suit desk feet that need room to sit on the riser.
Pros
- Three stackable heights
- L-shaped edge offers two placement options
- Rubber bottoms
Cons
- Measure the foot against the stated size limit
- Stacking changes the lift height
These ANNKUT furniture risers let you choose 1.5, 2.9 or 4.2 in by stacking their layers. Their L-shaped design has a full side and a half side, giving you another way to position compatible feet.
The stated fit is up to 4.5 x 2.4 in, so measure the desk foot in both directions. The bottoms use non-slip rubber, and the risers are made from polypropylene.
Stacked supports add height but can also change how the desk responds to side pressure. Keep the stack within the intended setup and test the desk gently for movement before putting equipment on it.
Choose these if you need a lift between the smallest and tallest fixed options. For help comparing the complete frame rather than raising a fixed desk, read How to Choose a Standing Desk Frame: Quick Fixes.
ANNKUT Bed Risers 4 Inch Heavy Duty: Best for round furniture feet
- 3.3 in actual lift
- Round design
- Fits legs under 3 in wide
- Built-in rubber pads
The round shape and built-in pads suit desks with compatible, upright feet. Measure the leg width before choosing this fixed-height option.
Pros
- Round footprint
- Built-in rubber pads
- Made for desk and table legs
Cons
- Legs must be under 3 in wide
- Fixed lift height
The round ANNKUT risers add 3.3 in beneath compatible desk legs. They are suited to feet under 3 in wide and have built-in rubber pads.
A round base can be a straightforward fit for compact feet, but the usable support area depends on the leg shape. Center each foot on its riser and check that it sits flat rather than balancing on an edge.
The lift is fixed, so measure the desk height before choosing this set. If you need a different leg type or want a full adjustable-height frame, compare best adjustable desk legs and best sit stand desk legs.
Choose this set if a 3.3 in lift and round supports fit your desk's feet. Skip it if the legs are wider than the stated limit or the desk needs a smaller raise.
shouwuhho Furniture Risers Bed Risers Heavy Duty: Best for small height adjustments
- Stackable 1 in sections
- Up to 4 in lift
- Fits legs under 2.37 x 2.37 in
- Non-slip rubber bottoms
Use one section for a small lift or stack sections for a taller raise. The maker advises against stacking too high for safety.
Pros
- Fine height increments
- Can suit square or round legs
- Rubber bottoms
Cons
- Small maximum leg size
- Maker advises against excessive stacking
shouwuhho risers are made for small height changes: each section raises furniture by about 1 in, and the pieces can be stacked for up to 4 in. The maker advises against stacking too high for safety.
The stated leg fit is under 2.37 x 2.37 in. The set has rubber on the bottom to grip the floor, and the top has raised dots intended to help keep furniture from sliding.
Use the smallest stack that reaches your target height. Check that each foot is centered and that all desk legs have matching support before putting weight on the desktop.
Choose these if you want incremental lift and your desk feet fit the size limit. For monitor height alone, a desk-leg riser is unnecessary; see our guide to the best monitor riser for desk.
Sephyroth Adjustable Bed Risers Furniture Risers 4Pack: Best for clamping upright legs
- Screw-clamp attachment
- Fits leg diameters from 0.85 to 1.65 in
- 2 or 4 in lift option
- Felt floor pads
The screw clamps attach around compatible upright legs, which can help keep a riser in place. Measure the leg and avoid this style for angled legs.
Pros
- Clamp attaches to the leg
- Choice of 2 or 4 in lift
- Felt bottoms
Cons
- Not for inclined legs
- Narrow leg diameter range
Sephyroth uses screw clamps to hold compatible upright legs, with a stated leg diameter range of 0.85–1.65 in. Its lift is available in 2 or 4 in options, and felt on the base is intended to protect floors.
This attachment style differs from open-top blocks because the riser clamps to the leg. The maker says it is not suitable for inclined legs, so check that your desk legs are vertical as well as within the diameter range.
Installation involves cleaning the leg, placing it against the fixed side and tightening the hexagonal screws. Follow the included steps and confirm the clamps are secure before using the desk.
Choose this set if your upright legs fit the range and you want a clamped connection. Avoid it for angled legs or feet outside the supported diameter.
Ecally 16 Pack Furniture Risers Adjustable Stackable: Best for multiple desk feet
- 16 pieces
- About 1.38 in per riser
- Stackable design
- Fits legs up to 1.97 in in diameter
The 16-piece set gives you spare supports or enough pieces for multiple furniture setups. Its small stated leg-size limit makes careful measuring important.
Pros
- Large piece count
- Stackable
- Rubber bottoms
Cons
- Limited to legs up to 1.97 in in diameter
- Actual lift depends on how pieces are stacked
Ecally includes 16 pieces, which can suit a setup with many feet or leave extras for another piece of furniture. Each riser is about 1.38 in high, and the rubber ring can be removed for stacking.
The risers fit furniture legs up to 1.97 in in diameter. The top has a raised center intended to help locate a foot, while the rubber bottom is designed to reduce slipping and floor scratches.
That small diameter limit makes this a poor match for broad desk feet. Measure the narrowest and widest points of each foot, then check that it sits securely without overhanging the support.
Choose Ecally if your desk feet are narrow and the larger quantity is useful. If your desk has wider legs, consider the adjustable ANNKUT blocks with their larger stated fit.
Sopicoz Wooden Bed Risers 3 Inch Round: Best for a wood finish
- Rubber wood
- 3 in lift
- Set of 6
- Rubber pads on top and bottom
These round wood risers add a fixed 3 in lift and come in a set of six. Their brown finish may suit a desk setup where the supports remain visible.
Pros
- Wood construction
- Set includes six risers
- Rubber pads on both sides
Cons
- Fixed 3 in lift
- Round shape may not suit every desk foot
Sopicoz's round supports add a fixed 3 in and are made from rubber wood with a walnut color finish. The set includes six risers, with rubber pads at the top and bottom.
The extra pieces may help if your desk has more than four support points, though the desk feet still need to sit securely on each round surface. Check the shape and width of every foot before use.
These supports don't adjust in height or clamp around a leg. They suit a buyer who wants a wood finish and has measured a need for a 3 in lift.
Choose Sopicoz if the visible wood finish works with your workspace and the fixed height fits. For smaller incremental changes, compare the stackable shouwuhho set.
uxcell 2 inch Bed Risers with Adjustable: Best for clamping a desk frame
- 2 in lift
- Adjustable screw clamps
- Fits frame thickness from 0.39 to 1.45 in
- Anti-slip fabric base
The clamp design is intended for furniture frames within its stated thickness range. Check whether your desk has a compatible frame or leg edge for attachment.
Pros
- Clamp can secure the riser to a frame
- No drilling required
- 2 in lift
Cons
- Requires compatible frame thickness
- Fixed lift height
uxcell's risers use adjustable screw clamps and add 2 in. They are designed for furniture frames 0.39–1.45 in thick, with an anti-slip fabric base.
This option may fit a desk frame edge or leg section that falls within that thickness range. Measure the part the clamp will hold, not just the visible width of the desk leg.
The clamp design avoids drilling, but you still need a compatible attachment point and enough clearance around it. Tighten the clamps as directed and check that the supports remain aligned before loading the desktop.
Choose uxcell if your desk has a frame within the stated thickness range and needs a 2 in lift. For thicker legs or open feet, choose a support designed for that geometry.
How do you choose a desk riser for legs?
Choose a desk riser by measuring the foot, selecting a lift height and checking how the support holds the leg. A secure fit matters more than choosing the tallest option.
What should you measure before choosing desk riser legs?
Measure each leg or foot at the point where it will meet the riser. Note its width, depth or diameter, and check whether it is straight, angled, round or square.
Then measure the current desktop height and add the planned lift. That gives you a better sense of whether the raised desk will work for seated or standing use.
Are stackable desk risers stable?
Stackable desk risers can offer more height choices, but every added layer creates another contact point. Use only the stack height intended for the design and check that the desk feet remain centered.
A clamp-on riser can hold a compatible leg in place, while an open block relies on the weight of the desk and its fit. Neither approach removes the need to check stability after installation.
Can you use bed risers under a desk?
Some furniture risers are designed for desks as well as beds, tables and chairs. The key is whether the desk foot fits the riser's shape and size limits and stays seated when the desk is moved or leaned on.
Don't assume a riser will suit any leg just because it is called a furniture riser. Angled legs, wide feet and frame edges may need different support styles.
Do desk risers make a fixed desk adjustable?
Desk risers can raise a fixed desk to one selected height, but they don't provide the push-button or manual movement of an adjustable frame. If you need to switch between sitting and standing during the day, consider an adjustable desk frame instead.
A desktop riser works differently by lifting the monitor and keyboard while leaving the desk itself in place. Learn what a desk riser is and how it works before choosing between the two types.
How we chose these desk risers for desk legs
We compared the stated lift, leg fit, attachment method and floor-contact features against the needs of someone raising a fixed desk. We favored options with clear size or height details that help you check compatibility before buying.
Our score weighs specs and features against what you're shopping for. A riser that offers a clear fit and useful height options may suit more desks than one with a narrow size range or a single tall lift.
Which desk riser for legs should you pick?
Choose Laowu for compatible folding table legs and two extension heights, ANNKUT's stackable blocks for multiple lift settings, or a clamp design when you want the support attached to a compatible upright leg. Measure first, then test the raised desk gently for movement before placing work equipment on it.
Our top 3 picks at a glance
-
1
-
2
-
3
