How to Choose a Monitor Arm for Bed Use
A monitor arm for bed works best when it clamps to a firm bedside surface and brings the screen to eye level without reaching across the mattress. Choose a mount that fits your screen size and weight, reaches your sitting position, and tilts and swivels enough to reduce neck strain.
On this page (10 sections)
- Can you mount a monitor arm beside a bed instead of on the bed?
- Where should you place a bedside monitor arm for good reach?
- Which mount type suits a bedside table best?
- How do you size a monitor arm for one screen in bed?
- When does a dual monitor arm make sense beside a bed?
- How much tilt, swivel and rotation do you need in bed?
- How do you keep a bedside monitor arm stable at night?
- What should you measure before you order a monitor arm for bed?
- How do you set up a monitor arm for bed step by step?
- Which monitor arm for bed fits your space best?
A monitor arm for bed is useful because it lifts a screen off the mattress and lets you move it into place. It can also feel odd in a bedroom, since most arms are built for a desk.
The mount point matters more than the arm itself.
Choose bedside mounting positions with adequate reach and secure structural support. A strong table, desk or tray beside the bed gives you that support.
A clamped arm on a firm surface is usually steadier than an arm tied to a bed frame.
We compared the specs below for screen size, weight, reach and mounting type. We did not test them in a bedroom.
The notes that follow use the stated sizes and limits to help you match a mount to your space.
Can you mount a monitor arm beside a bed instead of on the bed?
Yes, a monitor arm for bed use should mount to a bedside surface, not to the mattress or a soft headboard. A side table, lap desk, tray table or small desk next to the bed gives the arm a firm base.
The key question is reach. Sit up in your normal position and measure from the mount point to where your eyes sit.
The arm and pole need to carry the screen to that point with room for tilt. An arm that is too short forces you to lean toward the side of the bed.
Think about how you will work. If you use a keyboard, it needs a flat surface at lap or table height.
The monitor arm only holds the screen, so you still need a place for a keyboard, mouse, laptop or tablet. Plan both parts before you buy the arm.
Our monitor arm mount guide covers the general types of mounts. Use it to compare clamp, grommet and freestanding options before you narrow the choice for bed use.
Rule: mount to a firm bedside surface within easy reach of your sitting position, never to the bed itself.
Where should you place a bedside monitor arm for good reach?
Place the mount at the head end of the bed, on the side where you sit. That keeps the screen in front of you rather than at your feet.
It also keeps cables away from the pillows and bedding.
Try the position with the mount unloaded first. Hold a screen or a same-size board at the height you want.
See whether the arm can reach that spot without stretching the joints to their limit. Leave a little spare reach so you can tilt the screen toward you.
Keep the mount close to the mattress edge, but not so close that bedding touches it. Covers and blankets shift at night.
A gap of a few inches helps the arm stay clear and makes it easier to swing the screen in and out of position.
How to map reach from your pillow to the mount
Sit against your pillows in your normal reading position. Ask someone to mark eye height on the wall or hold a tape at eye level.
Then measure from the mount point to that mark, both across and up.
Now measure the same distance while lying back at a shallow angle. Many people work from a wedge pillow or a raised headboard, so the reach changes with the angle.
Choose the higher, more upright position as your base case, since that is the position you will use for longer sessions.
Also measure to your keyboard spot. If the keyboard will sit on your lap, the screen needs to be close enough that your arms are not stretched toward the bedside table.
A screen that is too far away is just as tiring as one that is too close.
Rule: choose a mount point that lets the screen reach your eyes with joints bent, not fully extended.
Which mount type suits a bedside table best?
A clamp mount fits a table or desk with a back edge and a top of known thickness. It holds the pole behind the surface and keeps the top clear.
For bed use, that open top is useful for a keyboard, tablet or a drink.
A freestanding mount fits a flat surface with no edge to clamp. It needs more of the tabletop for its base, and it needs room so the base cannot be pushed off.
It suits a tray table or a wide bedside table where a clamp cannot grip.
A grommet mount fits a desk with a hole for cables. It is a strong option for a small desk beside the bed.
It will not help if your table has no grommet hole or if you rent and cannot drill.

A clamp and grommet dual mount for two screens from 13 to 30 in, up to 22 lb each, for a firm desk or tabletop.
See it on Amazon
A freestanding dual mount for two screens from 13 to 27 in, up to 22 lb each, for a flat bedside surface with no clamp edge.
See it on AmazonSteel construction on both VIVO mounts helps the arms hold position. Both use VESA plates with 75x75mm or 100x100mm holes, so check that your screen has those holes before you order.
Cable clips on the arms and pole help keep cords off the bedding.
Rule: pick a clamp for a table with a grippable edge, and a freestanding base only for a wide flat surface.
How do you size a monitor arm for one screen in bed?
One screen is easier to place from bed than two. A single screen can swing toward you, tilt down and rotate to portrait for reading or code.
A dual arm can also hold one screen, but its second arm adds weight and takes extra room beside the bed.
Check three numbers before you buy: screen size, screen weight and VESA hole spacing. Screen size ranges in the data run from 13 in up to 30 in or 27 in, depending on the mount.
Weight limits reach 22 lb per screen on both VIVO mounts here.
Weight matters more than it seems in bed. You will adjust the arm from a reclined position, often with one hand.
A screen near the weight limit can droop or drift when you let go. Stay well under the limit if you plan to tilt and rotate the screen often.

Holds two screens from 13 to 30 in at up to 22 lb each, with tilt, swivel and rotation for landscape or portrait use.
See it on AmazonFor a single monitor, a dual mount still works, but you pay for an extra arm. If you later add a second screen from bed, a dual mount avoids a second purchase.
If you know you will use one screen only, the extra arm is mostly unused hardware.
Rule: match the mount to your single screen size and weight, and stay under the stated limit.
When does a dual monitor arm make sense beside a bed?
A dual arm makes sense if you split work across two screens, such as notes on one and a document on the other. It also helps if you switch between a laptop screen and an external monitor.
From bed, two screens can sit side by side at eye level without a stack of books or a riser.
It needs more bedside space than a single arm. Two screens side by side span a wide width, and the pole and arms need room to swing.
Measure the total width in your working position, not just the screen sizes added together.
A dual arm also pulls harder on the mount. Each screen can weigh up to 22 lb on these mounts, and the total load affects stability.
Keep both screens close to the pole and avoid pulling the arms far forward over the mattress.
Our best adjustable laptop stand for bed picks may suit you better if you mainly use a laptop. A laptop stand raises the laptop screen, while an arm on the bedside table can hold an external monitor.
Rule: choose dual only if you will use both screens often and your bedside surface can hold their width and weight.
How much tilt, swivel and rotation do you need in bed?
Tilt lets you angle the screen down or up to meet your eyes. From bed, you often look at the screen from below or from a reclined angle, so tilt matters more than it does at a desk.
The VIVO mounts here offer tilt from +90° to -90°, swivel to 180° and rotation to 360°.
Swivel turns the screen without moving the mount. That helps when you sit up, shift to a wedge pillow or turn to talk to someone.
Rotation flips the screen between landscape and portrait. Portrait works well for long text, documents and video calls where you want a tall view.
Height adjustment along the center pole sets the screen height. Set it while you sit in your working position.
The top of the screen should sit at or just below eye level, and the center of the screen should be easy to view without bending your neck.
Do not rely on a wide range on paper if the arm cannot reach your position. A mount that tilts and swivels well at a desk may still be too short from a bedside table.
Reach and tilt need to work together at your actual distance.
Rule: buy tilt and swivel that you can use while reclined, and set height to eye level in your sitting position.
How do you keep a bedside monitor arm stable at night?
Stability starts with the base and the balance of the arm. A clamp mount needs a top within its thickness range and a firm edge.
The VIVO dual clamp mount here fits desk tops up to 3.25 in thick by clamp, or by grommet. A thinner or softer top may flex under the load.
A freestanding base needs to stay within its footprint. The VIVO freestanding mount here has a base of 13 in by 10.5 in, with padding under the base to protect the surface.
Keep the screens within the center of gravity and do not pull them far forward or back, or the base can tip.
Route cables with the clips on the arms and pole. Loose cables can snag on bedding, pull the arm off balance or catch when you swing the screen.
A short cable loop gives the arm room to move without tugging at the connectors.
Check the mount after the first week and after any move. Clamps can loosen on a soft top, and freestanding bases can shift on a tray table.
Tighten and recenter the arm before a loose mount turns into a fall.
Rule: keep the screens over the base, route cables in the clips and recheck tightness after the first week.
What should you measure before you order a monitor arm for bed?
Measure the mount surface, the reach, the screen and the clearance. Each measurement rules out a class of mounts.
Guessing on any one of them is the most common cause of a poor fit beside a bed.
Measure the top thickness and edge shape for a clamp. Measure the flat area for a freestanding base, including the space the base needs to stay clear of bedding.
Measure from the mount point to your eyes in your working position. Measure your screen size, weight and VESA spacing.
Also measure the swing space. The arm needs room to turn the screen toward you and back.
A bedside table against a wall may limit swivel on one side. Test the swing with a tape or a light board before you mount anything.
Our how to choose a standing desk guide helps if you plan to pair the arm with a small desk beside the bed. A desk gives you a firmer clamp surface and a place for a keyboard.
Our how to choose a standing desk frame guide helps if you plan to raise and lower that desk from bed.
Rule: write down surface thickness, base area, reach, screen weight and swing space before you order.
How do you set up a monitor arm for bed step by step?
Start with the mount, not the screen. Fix the clamp or base to the bedside surface and check that it does not move when you push it.
Set the pole height so the screen will sit at eye level in your working position.
Attach the screens with the detachable VESA plates and tighten the screws. VIVO says hardware and instructions are included with these mounts.
Add one screen first, set its tilt and swivel, then add the second screen if you use a dual mount.
Adjust in order: height first, then tilt, then swivel, then rotation. Height sets eye level.
Tilt faces the screen to your eyes. Swivel turns it toward your position.
Rotation sets landscape or portrait. Lock each joint as you go so the screen holds still.
Test the full setup from your bed position. Sit up, reach for the keyboard, tilt the screen and swing it away.
If you have to lean to the side of the bed to reach a control, move the mount closer or choose a longer arm.
Our best desk riser with storage page can help if you want height without an arm. A riser lifts a screen or laptop on a flat surface, but it cannot swing or tilt the way an arm can.
Rule: set height, tilt, swivel and rotation in that order, then test the setup from your bed position.
Which monitor arm for bed fits your space best?
Pick the VIVO Dual Monitor Desk Mount if you have a firm desk or table at the bedside with an edge to clamp or a grommet hole. It fits two screens from 13 to 30 in at up to 22 lb each, with a steel build, cable clips and a 3 year warranty from VIVO.
It suits a side desk where you want two screens at eye level.
Pick the VIVO freestanding mount if your bedside surface has no edge to clamp. It fits two screens from 13 to 27 in at up to 22 lb each, with a 13 in by 10.5 in base and the same tilt, swivel and rotation range.
Keep the screens over the base and do not pull them far forward.
If you mainly use a laptop in bed, a laptop stand may fit better than an arm. Our best foldable laptop stand for bed picks suit travel and storage.
Our best adjustable laptop stand for lap picks suit lap use without a bedside table. Our best adjustable laptop stand for chair picks suit a chair or recliner setup.

Spring water in 1 liter bottles for a bedside break, so you can pause and reset your position during long sessions.
See it on AmazonTake short breaks during long sessions in bed. Stand, stretch, drink water and look away from the screen.
If you have ongoing neck, back or sleep pain, ask a doctor for advice. A monitor arm for bed can improve your setup, but it cannot treat a medical condition.
Rule: clamp to a firm surface if you can, use a freestanding base only on a wide flat top, and match screen weight to the stated limit.
Frequently asked questions
Can you use a monitor arm for bed safely?
Yes, if it mounts to a sturdy bedside surface or a stable freestanding base. Avoid clamping to a headboard, mattress frame or other soft part that can flex.
Keep the arm close enough that you do not pull it forward past its balance point, and check the screen weight limit before you buy.
What is the best mounting position for a bed monitor arm?
Mount it on a bedside table, desk or tray at the side of the bed, close to your pillow end. The screen should sit in front of you when you sit up against pillows, not across the bed.
Measure the reach from the mount to your eyes before you choose an arm length.
How high should a monitor be when you use it in bed?
Set the top of the screen at or slightly below eye level when you sit upright. You should not need to lift your chin or bend your neck down for long sessions.
Tilt the screen back a little so it faces your eyes rather than the ceiling or your knees.
Is a freestanding monitor arm better than a clamp for bed use?
A freestanding base suits a bedside table with no rear edge to clamp, while a clamp suits a desk or thick tabletop. The freestanding base takes more surface area and can tip if you pull the arm too far forward.
A clamp takes less space but needs a solid edge of the right thickness.
About this guide: Our look at monitor arms for bed draws on maker specs, materials and what owners report. See how we research.



